FAQ
Which flowmeter should be used for measuring high-viscosity, low-flow-rate media (such as heavy oil)?
The wedge flowmeter is recommended. It can perform high-precision measurements on fluids with Reynolds numbers as low as 500, offering outstanding advantages in
Can electromagnetic flowmeters measure corrosive fluids such as strong acids and strong alkalis?
Yes, electromagnetic flowmeters are suitable for conductive liquids. Their measuring conduits and electrodes can be selected from corrosion-resistant materials, and they are widely used in the chemical industry for flow monitoring of highly corrosive media such as acids and alkalis, with no pressure loss.
Is wet calibration necessary for an orifice flowmeter before installation?
Standard throttling devices can be put into use without actual flow calibration. Orifice plates are calculated and manufactured according to international standards, featuring a simple and
What is the maximum pressure and temperature of a magnetic flap level gauge?
Working pressure can reach up to 63.0MPa, and the working temperature range covers low-temperature type -196℃ to high-temperature type 260℃. The density of the measured medium is required to be no less than 0.45g/cm³, and it is equipped with a vacuum-sealed glass tube and an anti-overturn structure.
Can flow meters and level meters be customized according to on-site piping conditions or special media?
Okay. We provide integrated design and manufacturing services, capable of non-standard customization based on the user's specific pipe diameter, material, and media characteristics. Please provide detailed operating parameters so we can formulate a suitable solution.
How are warranty and after-sales service guaranteed?
We provide 7x24-hour after-sales service, with a professional service team to ensure timely response to issues. Products are manufactured using advanced equipment and WI standardized processes. For specific warranty terms, please contact a sales engineer for confirmation.
What are the applicable scenarios for Venturi tubes in gas measurement at low flow rates and large pipe diameters?
Venturi tubes are particularly suitable for gas measurement in large pipe diameters and low flow velocities, such as the metering of blast furnace gas and coke oven gas in chemical
How to obtain a specific product quotation and delivery period?
Product prices and lead times vary significantly due to differences in configurations such as bore, lining material, pressure rating, and more. Please contact us with your